I found that while running with my bike to exit T1 with a full bottle of water and Perpetuem the drink tube acted like a geyser. I bought a bite valve to correct the situation. I'll use a tie-wrap to secure the bite valve to the drink tube. The bottle lid has a slotted opening to pour in fluids on the go. The heart rate monitor (HRM) holder attaches to the bottle with a ring that goes around the opening under the lid. The ring has two notches at opposite ends to secure it in either the 12 O'clock or 6 O'clock position.
For test purposes, I used a small piece of foam pipe insulation around the HRM holder to better facilitate installation of the HRM.